In the center, the first column labeled "File or Word" consists of 16 boxes that represent the 16 inputs that DJB Radio can receive from your I/O device.
If you are using a broadcast Tools switcher with 16 PIP inputs then they PIP numbers correspond directly to these boxes.
You can type a Cut number in this box and when the Input is triggered, that audio file will play on the Satellite Triggered channel set in the On Air Settings.
If you don't know the cut number you can click the browse button [...] and choose it from the event library.
You can also type in one of the Valid Command words from the list on the far right.
In the Description box you should type something meaningful for that relay input to indicate its purpose.
This box shows the commands recognized by DJB Radio for use with satellite I/O triggers.
9700 or the word PLAY
These Commands will simply play the currently highlighted event on the On Air screen. Input 1 always performs this task. It's meant to act as a remote segue button.
========================
1 to 29999 and 31000-99999
These Commands will tell the program to fire the audio cut entered into this field when the input is triggered.
========================
30000 to 30999
These Commands will fire a multiple cut cart when the input is triggered.
========================
9701 or the word AUTO
These Commands will play the next event and then place the system into the Automated mode to continue playing audio cuts until a jock assist command is seen in the On Air screen.
========================
STOP
This Command will place the system in the Jock Assist Mode so it can await the next trigger from the satellite network.
========================
SPORTS
This command will tell the Sports Interface Program to play the next stop set.
========================
SportsOFF
This will end the usage of the sports interface program so you can go back to normal programming. It will automatically place the system into the Automated Mode.
