Time and Temperature Setup allows you to record and schedule time and temperature announcements that are initiated by the Command Cuts 9990 Announce The Time and 9991 Announce The Temperature.
Time and
Temperature Grid
This grid shows which Jock number is scheduled to air if the command cuts are used.
This allows you to have your Voice Guy all the time or individual Jocks voicing their own shows.
Like other grids in DJB Radio, click on the day of the week, and then edit the numbers in the boxes below.
To add a new jock, click on a number that has no info and then input the jock's name and choose Minutes Only (requires 60 cuts) or Hours and Minutes (requires 24x60 or 1,440 cuts for the truly dedicated)
Once you edit the Name or Time Type, click the Save Jock Info button.
Clicking one of these buttons will open the appropriate interface to record the cuts.
The temperature record interface shows the temperature you are going to record in the drop down box at the top and has a checkbox to automatically advance to the next temperature.
These range from --50 to 120 degrees.
Simply click Start Recording, record the temperature shown in the box and then hit Stop Recording.
If the levels are too hot, you can adjust the, with the slider on the far right.
If the checkbox is checked, the next temperature will be ready to record.
There is also an indication of Not Recorded if the file does not exist or Already Recorded if it does. You can still record over an existing cut.
Click the Done button when finished.
This Edit Time Cuts interface requires you to select the hour and minute you wish to record but otherwise works exactly as the Temperature interface above.
This Edit Time Cuts interface requires you to select only the minute you wish to record but otherwise works exactly as the Temperature interface above.
