System Menu

 

This area displays technical and debug information for the system, if there is an upcoming exact time event, it's information is noted here.  If the system sends or recives a contact closure its information is noted here.

 

 

This button will show the compressor settings window

 

 

This window gives you access to a window to send manual serial commands to your serial device that you have hooked up.  Generally that serial Deivce is a Broadcast Tools Switcher

 

 

 

Allows the user to toggle the Contact closure inputs on or off for the device they have connected tot he system (generally this is a Broadcast tools device)

 

 

This Button will launch the BGR Schedule Editor

 

Shows the incoming audio to the BGR record Device

 

If this area is not hidden on your System Menu then you have BGR Recording Enabled

 

This are will show you if the BGR is crrently recording and also the audio meters

 

This Stops the playback of all audio in the system to allow the user to exit if the system was still playing back

 

Unless all audio is stopped the Exit button is disabled

 

 

If you have changed the database information for cuts in the schedule this will allow the user to refresh and update that information in the schedule

 

Allows you to exit the On-Air Screen to access the Settings Screen

 

This button is disabled if the system is playing back audio