Input/Output Controls window

 

 

Satellite controls is where you will set up satellite music formats, talk shows, etc…  Any Shows that are hooked to your Digital IO Switcher and have input triggers can be setup in this section.

 

If they do not have any Input trigger, you do not need this section.

 

No Matter which Digital I/O card you use, Input 1 is hard coded in the Digital Juke Box to perform a segue.  Input 1 is hard wired so you can remote control a segue button on your console if you wish.

 

So depending on your input card, you can only program inputs 2 an up.

 

You can define up to 99 sets of Satellite Controls.  Multiple controls are needed for a satellite music format where there may be 10 different jocks all with different liners, ID’s Magic Calls, etc…

 

 

9700 or the word PLAY

 

These Commands will simply play the currently highlighted event on the on-air screen.  Input 1 always performs this task.  It's ment to act as a remote segue button.

========================

 

1 to 20000

 

These Commands will tell the program to fire the audio cut entered into this field when the input is triggered.

========================

 

 

30000 to 30999

 

These Commands will fire a multiple cut cart when the input is triggered.

========================

 

 

9701 or the word AUTO

 

These Commands will play the next event and then place the system into the Automated mode to continue playing audio cuts until a jock assist command is seen in the on-air screen.

========================

 

 

STOP

 

This Command will place the system in the Jock Assist Mode so it can await the next trigger from the satellite network.

========================

 

 

SPORTS

 

This command will tell the Sports Interface Program to play the next stop set.

========================

 

 

SportsOFF

 

This will end the usage of the sports interface program so you can go back to normal programming.  It will automatically place the system into the Automated Mode.