Effect Parameters for The Compressor. These 6 parameters are supplied by Microsoft and we are in no further control over the compressor. Your BEST bet is to try to set the compressor off the air until you get the sound you like.
Gain - Output gain of signal after compression, in the range from -60 to 60db. The default value is 0 dB.
Attack - Time before compression reaches its full value, in the range from 1ms to 500ms. The default value is 10 ms.
Release - Speed at which compression is stopped after input drops below Threshold, in the range from 50ms to 3000ms. The default value is 200 ms.
Threshold - Point at which compression begins, in decibels, in the range from -60db to 0db. The default value is -20 dB.
Ratio - Compression ratio, in the range from 1:1 to 100:1. The default value is 3, which means 3:1 compression.
Predelay - Time after Threshold is reached before attack phase is started, in milliseconds, in the range from 0ms to 4ms. The default value is 4 ms.
