Noise Removal Hiss & Pops & Clicks
Select NOISE REMOVAL from the File\Effects Menu\Pop-Up Noise Removal
Figure 1: Noise Removal selection with "Clicks & Pops Removal" & "Hiss Removal. Each popl-up give users ability toe adjust the degree of change
that the BBPro WAVEditor can make to the audio file displayed in the waveform. Figure 2 illustrates the
Figure 2: Select Remote Click & Pops See Figure 3 for the pop-up and the options
Figure 3: The wide range of audio processing cannot be written in text therefore, experimentation at different settings is needed
based on the extent of noise such as clicks and pops on the audio file displayed in the waveform window.
Controls of the effectiveness of the WAVeditor processor are in the hands of the user and the desired effect.
Figure 4: The same applies to Hiss Removal as stated in Figure 3. The quality of the audio and the degree of noise such as tape / transistor hiss
will determine if such noise and effectively be removed by the users. These adjustements are put in the hands of the user to adjust accordingly.
Note: There are specific editors are are dedicated to hiss, click and pop removal.
