DJB Radio
Guide to the tools and features
×
Menu
Index

Titling Options Area

Titling Options Area
 
 
 
 
1

Non-Titling

Replacement Text

1. Non-Titling 
Replacement Text
This is the text sent to RDS and Now Playing when an event plays that is NOT set for Now Playing in the Edit Audio Types window.
2

HTML Section

2. HTML Section
The checkbox enables the Now Playing interface below to launch with DJB Radio On Air.
You can use this to send the title and artist information of any Audio Type that has the Now Playing checkbox checked in the Edit Audio Types.
You can also select the style of now playing output  If you are going to use the now playing software provided by DJB then set the version to A
3

RDS Section

3. RDS Section
This area allows you to activate Serial RDS commands on the RS-232 COM Port listed under Default Port #.
Inovonics' standard RDS output preamble is "DPS=" For Example DPS=Back in Black by AC/DC on WDAV
If you are not using Serial port RDS select None from the drop down menu.
4

ShoutCast Button

4. ShoutCast Button
Clicking the button will bring up the window below where you can enter the Host IP Address, Port number, and password for ShoutCast.
This information will be available from your provider.
Don't forget the checkbox to enable it after you enter the info.
5

TuneIn Button

5. TuneIn Button
Clicking the button will bring up the window below where you can enter the Station ID, Partner ID, and Partner Key.
Don't forget the checkbox to enable it after you enter the info.
6

TCP/IP Button

6. TCP/IP Button
Clicking the button will bring up the window below where you can enter a TCP/IP address and port number to receive the Now Playing info.
Don't forget the checkbox to enable it after you enter the info.
The online help was made with Dr.Explain