Setting Startup and Shut Down Shows
Once you have created your Shows You will need to restart the logger software so that they will show up in the selection lists for the start up and shut down shows
Once that is done simply select the show you wish to run when then program starts
The process is the same for on shut down
The purpose of these function is to make sure that the logger has the correct routing set to it if the machine is rebooted
the shut down can also be used to clear the connections if thre machine is being rebooted so the blade (AOIP Driver) can come up with no routings attached to it
These functions are not required...you can do the same functions in the Wheatnet Navigator software.